Chinese translation for "bus interface circuit"
|
- 总路线接口电路
总线接口电路
Related Translations:
bus: n.(pl. busses, buses)1.公共马车;公共汽车;客机。2.〔口语〕汽车,机器脚踏车;飞机。3.【电学】信息转移通路;悔流条,母线。4.〔美俚〕(小餐馆等的)服务员(= bus boy).5.〔美俚〕火箭[飞弹]的一级。6.【计算机】(电脑的)总线。 a double-decker bus双层公共汽车。 get a bus乘公共汽车。 miss the bu
- Example Sentences:
| 1. | Key problems in design of can bus interface circuit 总线接口电路设计中的关键问题 | | 2. | This technology is especially suitable for bus interface circuit 这对总线接口电路尤其实用。 | | 3. | The basic structure and characteristics of pci bus , and especially , the method of implementation of pci bus interface circuit , are discussed at length in the paper 论文中讨论了pci总线的基本结构和特点,对pci总线接口电路的实现方法进行了详细的论述。 | | 4. | The method of realizing pci bus interface circuit is analyzed . the method of using universal interface chip pci9052 to realize it is presented . the questions that should be considered in the side of 分析了实现pci总线的接口电路的方法,提出了采用通用的pci接口芯片pci9052的方法来设计接口电路,把设计时需要考虑的pci侧的问题,转移到局部侧来,问题变得简单而直接。 | | 5. | Concretely , on the basis of describing the communication specification of arinc 429 with enhanced parallel port ( epp ) , the standard and the module application of dsp and cpld , the thesis has proposed the design of the arinc 429 technology based on dsp system . at first , the function and the application of each module of the system and the operation principle of high - performance cmos bus interface circuit hs - 3282 chip which forms the main body of the data diversion of the interface module are introduced . secondly , the hardware structure of the interface module is described in detail , mainly including data latch and buffer circuit , choice circuit of transmission rate , etc . and then the design philosophy and flow charts of the software are fully discussed , such as the basic requirement of software , the design and realization of the function 本文在简单的论述了pc并口协议( epp )与dsp之间的通信方法、 cpld模块逻辑控制应用和arinc429的通讯规范的基础上,给出了基于dsp的arinc429通讯接口的设计方案:对通讯板中各模块的功能和应用以及构成数据转换主体的总线接口芯片hs - 3282的工作原理做了说明;介绍了本设计所用的dsp和cpld的功能概况;详细叙述了通讯板接口模块的硬件结构设计,其中,对数据缓冲电路、数据传输速率选择电路、逻辑控制电路等各关键点做了重点介绍;具体阐述了软件设计思想及流程图,包括软件的基本要求和功能的设计与实现;接着从端口译码单元、 i / o通道、电平转换电路等方面进行了接口模块的软、硬件调试;最后,给出了测试结果,对研制工作做了总结,对本设计的优缺点各做了评述。 | | 6. | The main contents are as follows : the structure of mixed - signal circuit which newly - defined in ieee1149 . 4 std is analyzed in detail , especially anolog boundary module and test bus interface circuit . on the basis of mixed - signal boundary scan technology , a scheme of mixed - signal boundary - scan test system is presented and the hardwares are implemented , including the controller and display unit 主要研究的内容以及所作的工作如下:详细分析了ieee1149 . 4标准中针对混合信号电路测试新增的结构,即模拟边界模块及测试接口电路。基于混合信号边界扫描技术标准,提出混合信号边界扫描控制器的设计方案并实现了其硬件设计,包括边界扫描控制模块、显示驱动模块等。 |
- Similar Words:
- "bus interchange" Chinese translation, "bus interchange switch" Chinese translation, "bus intercommunication system" Chinese translation, "bus interface" Chinese translation, "bus interface chips" Chinese translation, "bus interface controller" Chinese translation, "bus interface emulation" Chinese translation, "bus interface level" Chinese translation, "bus interface logic" Chinese translation, "bus interface module" Chinese translation
|
|
|